WOOD RESEARCH Volume 69, Number 4, 2024
HARUNA SEIDU, RÓBERT NÉMETH, and FRANCIS WILSON OWUSU

MECHANICAL STRENGTH CHARACTERIZATION OF THREE LESSER-UTILISED TIMBER SPECIES IN GHANA

This study investigates the mechanical properties of three lesser-utilized timber species in Ghana: Blighia sapida, Gilbertiodendronlimba, and Lanneawelwitschii. Despite their potential, these species are underexplored compared to widely used commercial timbers. Six trees, two from each species, were tested for properties such as modulus of elasticity (MOE), modulus of rupture (MOR), compressive strength, shear strength, hardness, and density. Results indicate that Blighia sapida has superior mechanical properties, placing it in the D50 strength class, suitable for high-resistance structural applications. Gilbertiodendronlimba and Lanneawelwitschii are categorized under the D40 strength class, appropriate for moderate load-bearing uses. This research demonstrates that lesser-utilized species can serve as viable alternatives to traditional timbers, potentially reducing pressure on overexploited species. By promoting their use, the study supports sustainable forestry practices and contributes to a more diversified and resilient timber industry in Ghana

WOOD RESEARCH Volume 69, Number 1, 2024
HARUNA SEIDU, MARWA BROUGUI, NOOR ROZIANA ABDUL RAHIM, and RÓBERT NÉMETH

EVALUATION OF DYNAMIC AND STATIC MODULI OF ELASTICITY OF HYBRID EUCALYPTUS WOOD FROM DIFFERENT LOCATIONS IN GHANA

This study explores the mechanical properties of hybrid eucalyptus wood, with a focus on dynamic and static moduli of elasticity (MOE), which is crucial for understanding the stiffness behaviour of wood. The research employs acoustic and static measurements on samples prepared from six trees sourced from Winneba and Amantia in Ghana. The results reveal significant variations in static and dynamic MOE, with higher static MOE observed in both Amantia and Winneba samples. However, Winneba and Amantia samples at the tree level were found to be insignificant statistically. The densities of the samples from the two locations, Winneba and Amantia, were found to be significantly different. Correlation studies revealed strong relationships between wood density and static MOE, as well as static and dynamic MOE, providing valuable insights into the comprehensive characterization of the eucalyptus globulus species grown in Ghana

WOOD RESEARCH Volume 68, Number 4, 2023
HARUNA SEIDU, RÓBERT NÉMETH, FRANCIS WILSON OWUSU, PROSPER MENSAH, MICHAEL AWOTWE-MENSAH, and BOAKYE FELIX

EFFECT OF TEMPERATURE AND RELATIVE HUMIDITY VARIATIONS ON BENDING STRENGTH PROPERTIES OF HYBRID EUCALYPTUS WOOD IN GHANA

The study examines how temperature and relative humidity affect the bending strength properties of hybrid eucalyptus wood from Amantia and Winneba in Ghana. Eucalyptus wood from six trees were tested based on BS 373:1957 under different temperatures and relative humidity levels. The study measured the modulus of elasticity (MOE), modulus of rupture (MOR), and moisture content (MC) of the wood samples. The results showed that MOE and MOR varied significantly across the different conditioning parameters N, T, K and G. MC also influenced the mechanical strength properties of the wood, following the wood-water relation theories. The study concluded that climate and geographical location are important factors to consider when evaluating the mechanical properties of hybrid eucalyptus. This study holds practical implications for optimizing the utilization of eucalyptus wood particularly in the construction and related industries in the three different climatic zones of Ghana

WOOD RESEARCH Volume 68, Number 3, 2023
HARUNA SEIDU, RÓBERT NÉMETH, FRANCIS WILSON OWUSU, James Korang, Appiah-Kubi Emmanuel, JAMES KUDJO GOVINA, Fath Alrhman A.A Younis, and Safia Ibrahim

Mechanical Properties of PF and MUF Bonded Juvenile Hybrid Eucalyptus Plywoods Produced in Ghana

To obtain the mechanical properties of plywood produced from six yearold hybrid Eucalyptus in Ghana was the objective of this research. The samples for the experiment were prepared and tested according to GS EN 326-1, GS EN 310, GS EN 314-1, and GS EN 314 -2. The data obtained were analysed using the factorial ANOVA analysis. The mean results obtained for the various treatments were MOE (6520 – 7638 N/mm2), MOR (53.29 – 60.56 N/mm2, shear strength (2.47 – 5.51 N/mm2), failure (72 -90%) and density (725 – 748 kg/m3). The orientation of the surface veneer caused variations among treatments whiles the adhesives PF and MUF largely did not cause any variations among treatments. This study has proven that it is possible to produce sufficiently strong and resistant plywood from the juvenile wood of eucalyptus.