EVALUATION OF SELECTED MECHANICAL AND PHYSICAL PROPERTIES OF PARTICLEBOARDS CONTAINING WASTE PLASTICS
This article is focused on the research of particleboards (PB) composed of wood particles from spruce logs and recycled crushed plastic granulates. Crushed plastic granulates sized from 1.0 to 4.0 mm were obtained from worn automobiles by recycling, specifically painted and unpainted bumpers. The proportion of plastic granulate in the particleboards represented 10%, 15%, and 20% of the total weight of the composites. In the production of PB, urea-formaldehyde resin and paraffin emulsion were used as a binder and ammonium nitrate was used as a hardener. The aim of the article was to compare the selected properties of PB containing plastic filler with pure PB. Mechanical properties (tensile and bending strength), and physical properties (water absorption and thickness swelling) were evaluated according to EN 319, EN 310 and EN 317. Based on the results, it can be stated that the bending strength and physical properties of PB containing plastic filler were significantly better compared to pure PB. On the contrary, the tensile strength values were lower in most cases