WOOD RESEARCH Volume 64, Number 3, 2019
Pažitný Andrej, ALBERT RUSS, Boháček Štefan, Monika Stankovská, VLADIMÍR IHNÁT, and Štefan Šutý

Various lignocellulosic raw materials pretreatment processes utilizable for increasing holocellulose accessibility for hydrolytic enzymes Part II. Effect of steam explosion temperature on beech enzymatic hydrolysis

Beech wood is one of the most abundant species and the most harvested hardwood in Slovak Republic. The structure and chemical composition predetermines beech wood for the second generation bioethanol production. Steam explosion of beech wood from industrial treatment was investigated as a suitable pretreatment method. The effect of steam explosion temperature on beech sawdust enzymatic hydrolysis was investigated. Optimum steam explosion temperature at around 180°C was determined based on concentration of monosaccharides in hydrolysates and concentration of enzymatic hydrolysis inhibitors such as formic acid and acetic acid from beech sawdust. This corresponds to creating conditions resulting in good disintegration to the lignocellulosic structure which leads to increased cellulose accessibility. Non-treated beech sawdust does not enable sufficient cellulose accessibility while excessively high temperature results in significant breakdown of monosaccharides and lignin and formation of inhibitors. The concentration of inhibitors was also determined for each studied steam explosion temperature. Based on steam explosion of beech sawdust, the effect of severity factors was investigated to find the optimum conditions of steam explosion pretreatment on cellulose and xylan recovery of beech wood. The obtained optimum steam explosion temperature corresponds to severity factor R0 = 3.36 (180°C, 10 minutes).

WOOD RESEARCH Volume 64, Number 1, 2019
Pažitný Andrej, ALBERT RUSS, Boháček Štefan, Monika Stankovská, and Štefan Šutý

Various lignocellulosic raw materials pretreatment processes utilizable for increasing holocellulose accessibility for hydrolytic enzymes Part I: Evaluation of wheat straw pretreatment processes

New requirements for the biofuels industry force individual enterprises to develop various procedures for newly selected substrates pretreatments that could be applicable in processing of large quantities of raw materials. Even greater pressures are on second-generation biofuels producers justified by selection of waste lignocellulosic substrates and methods of substrate processing. Among the most suitable lignocellulosic raw materials in Slovak Republic (SR) for 2G bioethanol production is wheat straw. This raw material (Senec region, SR) for enzymatic hydrolysis was pretreated by dry milling (Brabender), cyclic freezing and thawing, wet milling (Sprout Waldron), two-step process of steam explosion at 180°C and extrusion at 145°C and one-step process of steam explosion at different temperatures. Wheat straw holocellulose accessibility was tested by adsorption of three commercially available dyes (Pylam Products Company, Inc., USA). Absorptivity coefficient of each dye at its maximum wavelength was determined from individual calibration curves of dyes and their values resulted ranging from 13.78 to 19.52 dm3.g-1.cm-1. The absorption of solution was measured and concentration of residual dye was calculated at given wavelength. The accessibility of holocellulose contained in wheat straw pretreated by steam explosion was controlled by SEM (scanning electron microscope) in correlation with the ratio of adsorbed dyes according to the modified Simons’ method.