WOOD RESEARCH Volume 69, Number 1, 2024
CLAUDETE CATANHEDE DO NASCIMENTO, CRISTIANO SOUZA NASCIMENTO, ROBERTO DANIEL DE ARAUJO, MARIA DA PAZ LIMA, and JORGE ALVES DE FREITAS

INFLUENCE OF SITES ON THE PHYSICAL AND MECHANICAL PROPERTIES OF NATIVE TROPICAL WOODS

The Amazon rainforest displays wide ecological diversity, reflected in its wood variation. The study evaluated the influence of different locations on the properties of wood from native tropical species extracted from the Brazilian Amazon. The most frequent species in the locations were selected, and a total of 104 trees were extracted. The logs were sawed breakdown to make beams (50 × 110 × 2,000 mm). The wood density and mechanical resistance of these samples were determined. The wood density ranged of 0.25-1.00 g/cm3, modulus of elasticity and rupture in static bending ranged of 5,982-19,025 MPa and 35-204 MPa, respectively. For compressive strength parallel to the grain, the range was 24-111 MPa; the strength of wood compressed parallel was 20-245 MPa, and the shear strength was 50-245 MPa. The study detected differences in the physical and mechanical properties of the woods regarding the origin of the sites (Amazonas-Pará/Brazil), with the modulus of elasticity and the wood density showing the greatest variations

WOOD RESEARCH Volume 62, Number 5, 2017
Kaimeng Xu, Kunyong Kang, Can Liu, Yuanbo Huang, Gang Zhu, Zhifeng Zheng, and Wenlun Li

The effects of expoxidized soybean oil on the mechanical, water absorption thermal stability and melting processing properties of wood plastic composites

To promote the environmentally friendly properties of wood plastic composites (WPC) fabricated via a polyvinyl chloride resin matrix, the effects of different amounts (0, 5, 15, 25, and 35 phr) of expoxidized soybean oil (ESO) on mechanical strengths, thermal stability, melting processing properties, and water absorption of the composite samples were studied. The results show that the tensile strength of WPC decreased. However, the elongation at break, water absorption and thickness swelling rates increased, especially for ESO addition amounts beyond 15 phr. The flexural strength and modulus of WPC followed an upward trend initially (at 5 phr ESO), then switching to a downward trend. The initial thermal stability at the first thermal decomposition stage and the melting processing temperature of the composites ewere effectively improved with the increase of ESO level. Compared to the samples without added ESO, the maximum thermal decomposition temperature (Tmax1 and Tmax2) values of the composites increased by 31°C and 8°C, respectively, while the melting processing temperature of the composites significantly decreased by 24°C corresponding to an added level of 35 phr. In summary, the WPC samples with 5-15 phr ESO addition not only effectively retained their the mechanical strengths and water absorption stability, but also improved their the thermal stability and melting processing properties.