Effect of heat treatment and wax impregnation on dimensional stability of Pterocarpus macrocarpus wood

In order to improve dimensional stability and control deformation, heat treatment (HT) and wax impregnation (WI) were conducted to large size boards (LB) of Pterocarpus macrocarpus and the tangential swelling were compared in various relative humidity (RH) conditions. The results show that the tangential swelling and shrinking of control group and treated group performed differently corresponded to various relative humidity (RH). Comparing with control group, the swelling ratio of HT combined WI group was much less, and followed by 180°C-3h HT group. The maximum swelling ratio decreased by 31% and 29% in humidity chamber and indoor conditions respectively. The swelling ratio was affected by size of samples, LB showed smaller welling ratio than small sample. Wax filled in cell cavities and presented uneven distributions after impregnation. The rate of wood hygroscopicity was reduced after HT combined WI treatment which was an effective method on improvement of wood dimensional stability.

Effects of wax and dimethyl silicone oil mixed impregnation on dimensional stability of two hardwoods

In this experiment, cocobolo (Dalbergia retusa Hesml.) and African padauk (Pterocarpus soyauxii) specimen were selected before treating with wax, wax + 20% dimethyl silicone oil, wax + 40% dimethyl silicone oil at 120°C for 3 h and 6 h respectively. The weight gain percentage (WPG), radial swelling coefficients (RS), tangential swelling coefficients (TS), chemical composition and strength of hydroxyl groups were investigated. The results indicated that three factors affect dimensional stability, including the impregnation time, tree species and ratio of wax /dimethyl silicone oil. The degree of a melioration in the dimensional stability increase as the impregnation time increase from 3h to 6h. The effect of the impregnation on the dimensional stability of the African padauk was better than that of the cocobolo. Wax+ 40% dimethylsilicone oil was the optimal condition in this study. Wax and dimethylsilicone oil mixed impregnation can improve the dimensional stability to a certain extent, which provides a new idea for the wood modification.